12" x 24" - Chevalier Surface Grinder
Inventory ID #:
MID #:
Serial #:

New Table Bearings and More - Complete - Automatic Downfeed
Table was just removed and machine was gone through to replace any worn out parts. New rollers, bearings and guards have been installed as well as any other small odds and ends

Table Working Surface: 11-3/4" x 25-3/8"
Max Chuck Size: 12" x 24"
Max Table Movement (Manual): 27.5" / 25-5/8" Automatic
Max Distance Wheel to Table: 19-3/4" Max Spindle Center to Table
Max Wheel Size: 14" x 2" x 5" Bore
Wheel Speed: 1750 RPM
Auto Longitudinal Feed Rate: 16 - 82 FPM Variable
Rapid Wheelhead Feed Rate: 8 IPM
Auto Wheelhead Downfeed Increments: .0005" - .002"
Hand Wheelhead Downfeed Increments: 0.05" Per Revolution
Spindle Drive: 5 HP


Specification Description
Chuck Size 12" x 24"
Max. Grinding Length (Longitudinal) 24"
Max. Grinding Width (Crosswise) 12"
Max. Distance Table Surface to Spindle Centerline 24-3/4"
Longitudinal Travel, Hydraulic 25-5/8"
Max. Longitudinal Travel, Manual 27-1/2"
Table Speed (Infinitely Variable) 16-82 FPM
Longitudinal Rapid Traverse Rate 10 FPM
Automatic Traverse Increment 1/8" - 1-1/4"
Max. Cross Travel, Automatic 12"
Max. Cross Travel, Manual 13-3/4"
Cross Travel Micro Feed Per Revolution .005"
Cross Travel Micro Feed Per Graduation .00005"
Wheelhead Vertical Infeed, Automatic .00005" - .002"
Wheelhead Vertical Infeed, Handwheel per Revolution 0.05"
Wheelhead Vertical Infeed, Handwheel per Graduation .0005"
Vertical Rapid Traverse Rate 25 IPM
Standard Grinding Wheel 14" x 2" x 5" bore
Grinding Spindle Drive 5 HP
Approximate Floor Space 106" x 59" x 76"
Approximate Weight 5,000 lbs

Equipped With:
12" X 24" Electromagnetic Chuck And Control. Automatic Incremental Down Feed. Automatic Longitudinal And Cross Feeds. Hydraulic Over The Wheel Dresser. Coolant System With Paper Filtration. Free Standing Hydraulic Unit. All Available Manuals And Drawings.

Equipment - Wanted

This is a list of machines we are currently looking for information on. If you have any leads for anything below, please click the "EMAIL US!" link

Tornos - SAS - 16.6 Multi-spindle Screw Machine - Fanuc - 1995+
9/16" 14mm Sakamura - BP-440
3/4" Sakamura BP460 - 4D4B Header
AT Series Asahi AT-625/650
Wire Drawer for 1012 national
A few turntables around 40-48"
Open die header 3/8" x 24" long hex head bolt in 304 s/s
Thread Roller for 3/8" x 24" long hex head bolt in 304 s/s
1" Sakamura SSR70 rotary die roller
3/8" National 6L4 4-Die
Any 3/8" 4die National BM or progressive
Wafios N6 Nail machine
Nedschroef MM12 Nut former
3/8" National 68 HS LD DSSD
Hatebur AMP-20 Hot Former (any condition)
Reed A-33 Cylindrical die thread roller
National 750 S3 6 Die