Thank you for your interest in this machine. Unfortunately this machine has recently been sold. Click here if you are interested in getting information on a new machine.
5/16" (M8) - Nedschroef 4D4B Cold Header
Inventory ID #:
Serial #:
M8 - Nedschroef 4D4B Cold Header
Nedschroef M8 x 105mm 4D4B Cold Header
MFG 2001

Machine Type BR2
Range M8
Max. width across flats (mm) 14
Max. bolt length (mm) 80
Min, bolt length (mm) 16
Max. thread length (mm) 50
Max, cut-off length (mm) 105
Min. cut-off length (mm; 20
Die diameter (mm) 52
Cut-off diameter at 600 INI/rnm2 10
Punch diameter (Trim punch) (mm) 46
Diameter feeding rolls (mm) 290
Center distance between dies (mm) 64
Stroke mainslide (mm) 180
Stroke length punch ejectors (mm) 23
Forging load (kN) 800
Max. strokes per Min.* 135-200
Motor output (kW) 23/34
RPM of main motor 50Hz 1000/1500
RPM of main motor 60Hz 1200/1800
Total connected Power rating (kVA) 50
Required compressed air pressure (Kg/mm') 6
Compressed air consumption (m3/h) 6
Weight (Tons) 14

Equipment - Wanted

This is a list of machines we are currently looking for information on. If you have any leads for anything below, please click the "EMAIL US!" link

Tornos - SAS - 16.6 Multi-spindle Screw Machine - Fanuc - 1995+
9/16" 14mm Sakamura - BP-440
3/4" Sakamura BP460 - 4D4B Header
AT Series Asahi AT-625/650
Wire Drawer for 1012 national
A few turntables around 40-48"
Open die header 3/8" x 24" long hex head bolt in 304 s/s
Thread Roller for 3/8" x 24" long hex head bolt in 304 s/s
1" Sakamura SSR70 rotary die roller
3/8" National 6L4 4-Die
Any 3/8" 4die National BM or progressive
Wafios N6 Nail machine
Nedschroef MM12 Nut former
3/8" National 68 HS LD DSSD
Hatebur AMP-20 Hot Former (any condition)
Reed A-33 Cylindrical die thread roller
National 750 S3 6 Die