Machine

13" X 30" Clausing Metosa Engine Lathe
Inventory ID #:
MID #:
Serial #:
Description:
329
24

Model: C1330S
Specifications:
13" X 30" Clausing Metosa Engine Lathe

Swing: 13 "
Centers: 30 "
Spindle Bore: 1.5 "
Power: 5 hp
RPM: 2000 rpm
Swing Over Cross Slide: 6.89 "
Dimensions: 37.5 W X 86"
Weight: 2,250

Model: C1330S

Swing Over Bed Ways...13.2"
Swing Over Carriage...12.2"
Swing Over Cross Slide...6.89"
Center Distance...30"
Bed Width...10"
Cross Slide Travel....9.65"
Top Slide Travel...4.72"
Max. Tool Size...5/8" X 5/8"
Spindle Hole...1-1/2"
Spindle Speeds (9 Steps)...60 To 2,000 Rpm's
Spindle Nose...D1-5
Spindle Taper..#4 Morse
Chuck Size...8" 3-Jaw
Chuck Size...10" 4-Jaw
Feeds Long (44)....0018 To .026
Feeds Cross (44)....0005 To 0076
Threads Inch (44)....4 To 60 TPI
Threads Metric (44)....05 To 7.5
Modular Threads (44)....25 To 3.75
Diametrical Pitch (44)...8 To 120
Tail Stock Quill Diameter...1.9"
Tail Stock...5.5"
Tail Stock Taper....#3 Morse
Main Motor...5 Hp.
Weight...2,250 Lbs.
Floor Space Width X Length...37.5" X 86"
Machine Height...51"
Coolan...Yes
Steady Rest...Yes
Taper Attachment...Yes
Full Length...Yes




Equipment - Wanted

This is a list of machines we are currently looking for information on. If you have any leads for anything below, please click the "EMAIL US!" link



Tornos - SAS - 16.6 Multi-spindle Screw Machine - Fanuc - 1995+
9/16" 14mm Sakamura - BP-440
3/4" Sakamura BP460 - 4D4B Header
AT Series Asahi AT-625/650
Wire Drawer for 1012 national
A few turntables around 40-48"
Open die header 3/8" x 24" long hex head bolt in 304 s/s
Thread Roller for 3/8" x 24" long hex head bolt in 304 s/s
1" Sakamura SSR70 rotary die roller
3/8" National 6L4 4-Die
Any 3/8" 4die National BM or progressive
Wafios N6 Nail machine
Nedschroef MM12 Nut former
3/8" National 68 HS LD DSSD
Hatebur AMP-20 Hot Former (any condition)
Reed A-33 Cylindrical die thread roller
National 750 S3 6 Die