Machine

LT-1000 Hydraulic Tensile Strength Tester
Inventory ID #:
MID #:
Serial #:
Description:
410


Specifications:
USED Reconditioned/Retrofitted & Certified Forney Model LT-1000
Hydraulic Tension and Compression Testing Machine with Hydraulic Gripping System

600,000 lbf Capacity


SPECIFICATIONS:
Tension Testing Opening (Less Tooling) . . . . . . . . . 2 8" (Adj.)
Compression Testing Opening (Less Tooling) . . . . . . 27" (Adj.)
Distance Between Columns/Screws . . . . . . . . . . . . 13 ½"
Testing Stroke . . . . . . . . . . . . . . . . . . . . . . 24"
Table Size (WxD) . . . . . . . . . . . . . . . . . . . . . 13" x 20"
Testing Speed (IPM) . . . . . . . . . . . . . . . . . . . 0 – 2
Crosshead Adjusting Speed (IPM) . . . . . . . . . . . . 12
Approximate Overall Dimensions:
Standard Console (WxDxH) . . . . . . . . . . . 63" x 36" x 38"
Load Frame (WxDxH) . . . . . . . . . . . . . . 35" x 24" x 154"
Approximate Weight (Lbs) . . . . . . . . . . . . . . . . 15,850
Electrical Requirements (V,Hz,PH) . . . . . . . . . . . 460, 60, 3, 15A

EQUIPPED AS FOLLOWS:
 New Frank Bacon Servo Hydraulic Power Supply for Closed Loop Control.
 Dell, Dual Core E2200/2.20GHz Computer (80 GB H.D., 1.0 GB 800MHz Ram)
with 48X32 CDRW/DVD Drive, Dell Quiet Key Keyboard & Dell 2-button Mouse.
 Dell, 23" Flat Screen Color Monitor & Manual.
 HP, DeskJet Color Printer (or similar) with printer Cable & Manual.
 Microsoft Windows 7 PRO Workstation.
 MTESTQuattro, Material Testing Software for Data Acquisition (load, position &
strain), Analysis and Computer Controlled Testing with Manual.
 MTESTQuattro, Micro console for sensor excitation and analog/digital signal
processing with USB cable.
 Celesco, High Resolution TTL compatible incremental quadrature Encoder for
position and testing speed values with signal cable and mounting hardware.
 Precision Pressure Transducer for load values with signal cable and mounting
hardware.
 Sensor Over-Range Protection Solid State Electronics.

WARRANTY:
ONE Year parts and labor Warranty on all reconditioned Testers and 90 Days on Reconditioned tools less all travel and/or Shipping Related Expenses. Unless otherwise specified.




Equipment - Wanted

This is a list of machines we are currently looking for information on. If you have any leads for anything below, please click the "EMAIL US!" link



Tornos - SAS - 16.6 Multi-spindle Screw Machine - Fanuc - 1995+
9/16" 14mm Sakamura - BP-440
3/4" Sakamura BP460 - 4D4B Header
AT Series Asahi AT-625/650
Wire Drawer for 1012 national
A few turntables around 40-48"
Open die header 3/8" x 24" long hex head bolt in 304 s/s
Thread Roller for 3/8" x 24" long hex head bolt in 304 s/s
1" Sakamura SSR70 rotary die roller
3/8" National 6L4 4-Die
Any 3/8" 4die National BM or progressive
Wafios N6 Nail machine
Nedschroef MM12 Nut former
3/8" National 68 HS LD DSSD
Hatebur AMP-20 Hot Former (any condition)
Reed A-33 Cylindrical die thread roller
National 750 S3 6 Die