Machine

1 1/8" National Model 1000 HD LS 4-Die Progressive Header
Inventory ID #:
Serial #:
Description:
266

Specifications:
National Model 1000 Heavy Duty Long Stroke 5-Station 4-Die Progressive Header

1970s
Very Good Condition

Number of forming dies .......................... 4
Production per minute .............................. 65

Major Specifications:
Max. Cutoff diameter......... 1.125” ........... 28.6mm
Min. Cutoff length............... 1.5” ............... 38.1mm
Max. Cutoff length.............. 11.0” ............. 279.4mm
Max. Kickout stroke (die)... 8.5” ............... 215mm
Kickout stroke punch......... 2.25” ............. 56mm
Across flats hex................... 1.42” ............. 61mm
Die diameters....................... 5.375” ........... 136.5mm
Punche diameters................ 4.375” ........... 111.1mm
Total Heading Load............ 400tons.......... 400tons
Main Motor.......................... 100HP............ 75kw
Net weight (approx.).......... 129,800lbs..... 59,000kgs
Floor Space:
Length................................... 25’8” ............ 7,823mm
Height................................... 10’1” ............. 3,353mm
Width.................................... 10’11” ........... 3,327mm

Complete with:
• Heat treated allow steel bedframe
• Over-arm heading ram
• (4) Four full forming dies
• Bushing cutoff system
• Arranged for TKO in all stations
• Individual adjustment of punch holders
• Pneumatically conotrolled feed roll gripping pressure
• Individually adjustable finger opening & closing transfer
• Pneumatic transfer lift
• (5) roll power straightener (mounted on machine)
• Recirculating oil lubriction system
• Funtionally located operator adjustments and controls





Equipment - Wanted

This is a list of machines we are currently looking for information on. If you have any leads for anything below, please click the "EMAIL US!" link



Tornos - SAS - 16.6 Multi-spindle Screw Machine - Fanuc - 1995+
9/16" 14mm Sakamura - BP-440
3/4" Sakamura BP460 - 4D4B Header
AT Series Asahi AT-625/650
Wire Drawer for 1012 national
A few turntables around 40-48"
Open die header 3/8" x 24" long hex head bolt in 304 s/s
Thread Roller for 3/8" x 24" long hex head bolt in 304 s/s
1" Sakamura SSR70 rotary die roller
3/8" National 6L4 4-Die
Any 3/8" 4die National BM or progressive
Wafios N6 Nail machine
Nedschroef MM12 Nut former
3/8" National 68 HS LD DSSD
Hatebur AMP-20 Hot Former (any condition)
Reed A-33 Cylindrical die thread roller
National 750 S3 6 Die