Machine

10" x 30" Brown & Sharpe Surface Grinder
Inventory ID #:
Serial #:
Description:
344
523-1030-173
1030 Micromaster
Specifications:
WORKTABLE SIZE.............................. 10" X 30"
GRINDS WORK TO HEIGHT OF............ 18" (W/14" WHEEL)
WHEEL SIZES........................ 14" X 1- 1/2" X 5"
DIRECT DRIVE SPINDLE MOTOR............ 5 HP - 1800 RPM
LONGITUDINAL TABLE SPEED ................ 10 - 125 FPM
AUTO CROSSFEED PER TABLE REVERSAL ...... 0.010 - .500"
POWER WHEEL TRUING ........................... 10" IPM
CROSS HANDWHEEL, GRAD. ....................... 0.0002"
RAPID TRAVERSE POSITIONING.................... 150 IPM
RAPID VERTICAL POWER POSITIONING............... 40 IPM
VERTICAL HANDWHEEL, GRAD. .................... 0.0002"
FINE FEED KNOB (GRAD.) FOR VERTICAL FEED ..... 0.0001"
APPROX. MACHINE WEIGHT ..................... 6,000 LBS




Equipment - Wanted

This is a list of machines we are currently looking for information on. If you have any leads for anything below, please click the "EMAIL US!" link



Tornos - SAS - 16.6 Multi-spindle Screw Machine - Fanuc - 1995+
9/16" 14mm Sakamura - BP-440
3/4" Sakamura BP460 - 4D4B Header
AT Series Asahi AT-625/650
Wire Drawer for 1012 national
A few turntables around 40-48"
Open die header 3/8" x 24" long hex head bolt in 304 s/s
Thread Roller for 3/8" x 24" long hex head bolt in 304 s/s
1" Sakamura SSR70 rotary die roller
3/8" National 6L4 4-Die
Any 3/8" 4die National BM or progressive
Wafios N6 Nail machine
Nedschroef MM12 Nut former
3/8" National 68 HS LD DSSD
Hatebur AMP-20 Hot Former (any condition)
Reed A-33 Cylindrical die thread roller
National 750 S3 6 Die